+86-371-66302886 | [email protected]

What is the structure of alu alu blister foil?

ቤት

What is the structure of alu alu blister foil?

The structure of Alu Alu blister foil, also known as Aluminium Cold Forming Blister Foil, is designed for packaging highly sensitive pharmaceutical and generic medicines that are hygroscopic (moisture-absorbing) or light-sensitive and cannot be suitably packed with barrier plastic films. This type of foil is specifically engineered for cold forming, which is a process used to create blister packs for pharmaceutical products.

The Alu Alu blister foil typically consists of two layers of aluminum foil laminated together. Each layer of aluminum foil provides a high barrier against light, እርጥበት, and oxygen, which is essential for protecting sensitive pharmaceutical products. The foil is also coated on one side to allow for heat sealing during the blister pack formation process.

alu-alu blister foil

alu-alu blister foil

Alu Alu blister foil typically consists of two layers of aluminum foil laminated together. Each layer of aluminum foil provides a high barrier against light, እርጥበት, and oxygen, which is essential for protecting sensitive pharmaceutical products. The foil is also coated on one side to allow for heat sealing during the blister pack formation process.

Alu-Alu blister packaging typically consists of three layers:

ውጫዊ ንብርብር (25-micron PVC film): A layer of aluminum foil that is coated with a heat-sealable layer. This layer is usually the one that is heat-sealed to form the blister pack.
የውስጥ ንብርብር (45-ማይክሮን አልሙኒየም ፎይል): Another layer of aluminum foil that provides additional barrier properties and strength to the blister pack.

The exact thickness and composition of Alu Alu blister foil may vary depending on the specific requirements of the pharmaceutical products being packaged. በአንዳንድ ሁኔታዎች, Alu Alu blister foil may be replaced by a structure containing special polyester film and soft aluminum foil. This new structure is composed of 36 micron special polyester / 50 micron soft aluminum foil / 36 micron special polyester composition, providing an alternative to traditional Alu Alu laminates for pharmaceutical packaging.

የቀድሞ ገጽ:
ቀጣይ ገጽ:

ተገናኝ

ቁጥር 52, ዶንግሚንግ መንገድ, ዠንግዡ, ሄናን, ቻይና

+86-371-66302886

[email protected]

ተጨማሪ ያንብቡ

ምላሽ ይተው

የኢሜል አድራሻዎ አይታተምም።.

ትኩስ ሽያጭ

ተዛማጅ ምርቶች

8011 pharma አሉሚኒየም ፎይል
8011 ፋርማሲዩቲካል ማሸጊያ አልሙኒየም ፎይል
ስያሜ
የመድኃኒት PVC ሉህ ጠንካራ ሉህ
ፋርማሲዩቲካል PVC ሉህ ማሸጊያ
ስያሜ
ለመድሃኒት ጥብቅ PVC
ለፋርማሲቲካል ብሊስተር ጥቅል ጠንካራ PVC
ስያሜ
18 ማይክሮን አልሙኒየም ፎይል
18 ማይክ ፋርማ አልሙኒየም ፎይል
ስያሜ

ጋዜጣ

ምላሽ ይተው

የኢሜል አድራሻዎ አይታተምም።.

© የቅጂ መብት © 2023 Huawei Prma Foil ማሸጊያ