Marukunin magunguna masu sanyi

Foil na Aluminum shine kayan marufi mai kyau na magunguna, yayin da murfin alumini mai sanyi-kafa shi ne kayan marufi na magunguna tare da ƙarin yin fice. Don marufi na magunguna, foil mai sanyi na aluminium wanda aka saba amfani da shi shine tsarin laminated wanda ya haɗu da kaddarorin kariya na aluminum tare da ƙarin yadudduka don cimma ayyuka kamar kariya ta shinge., m, da rufewa.

Tsarin sanyi wanda ya dace da marufi na magunguna

Tsarin tsare sirri na sanyi don magunguna, misali aluminum sanyi foil don marufi na magunguna na iya ƙunsar yadudduka masu zuwa:

a. Polyester (PET) fim Layer (12-25 microns)

– Manufar: ana amfani da shi azaman fim mai ɗaukar hoto don samar da ƙarfin injin da bugu.

– Siffofin: babban girma kwanciyar hankali, m bugu surface, mai kyau hawaye juriya.

– Kauri: 12-25 microns, dangane da buƙatun don sassauci da ƙarfi.

b. Layer m (1- 3 microns)

– Manufar: bond polyester fim zuwa aluminum tsare.
– Siffofin: Manne da aka kunna zafi ko manne mai matsa lamba wanda ke tabbatar da amintaccen haɗin gwiwa ba tare da lalata kaddarorin shinge na foil ba..

c. Aluminum foil Layer (6-9 microns)

– Manufar: Yana aiki azaman babban shinge na farko don kare miyagun ƙwayoyi daga danshi, haske, oxygen da sauran gurbatawa.
– Siffofin: Babban shinge ga iskar gas da danshi, haske mai haske da mara guba.
– Kauri: 6-9 microns (7mic,9mic)shine daidaitaccen kauri don aikace-aikacen foil mai sanyi don magunguna.

d. Rufin hatimin zafi / Layer na farko (1-5 microns)

– Manufar: Yana ba da fili wanda za'a iya rufe zafi zuwa fakitin blister ko wasu abubuwan da ake amfani da su.
– Siffofin: Wannan Layer ya dace da Layer ɗin rufewa na PVC ko fina-finan blister na PVDC. Yana tabbatar da tabbataccen hatimi ba tare da shafar miyagun ƙwayoyi a ciki ba.
– Nau'in: Yawanci hatimin hatimin zafi ko lacquer wanda ke manne da PVC, PVDC ko sauran blister substrates na kowa.

Ingantaccen tsarin tsare sanyi

A wasu lokuta, Aluminum sanyi foil na iya samun ƙarin yadudduka don ingantaccen aiki:

e. Rufewar kariya (na zaɓi, 1-2 microns)
– Manufar: Haɓaka abrasion da juriya na sinadarai na foil.
– Siffofin: Samar da ƙarin shamaki, Musamman mahimmanci ga magunguna masu mahimmanci.

Maɓalli don sanyi aluminum don marufi na magunguna

Cold-kafa aluminum foil kamar yadda m marufi na Pharmaceuticals bukatar samun halaye na kare magunguna da kuma tarewa waje dalilai., don haka mahimman abubuwan da za a yi la'akari da marufi na sanyi na magunguna abubuwa ne guda huɗu:
1. Shamaki: Ƙwararren murfin aluminum yana ba da kyakkyawan shinge ga danshi, oxygen and UV rays to protect the stability and efficacy of the drug.
2. Printability: The PET film layer enables high-quality label and brand printing, which is critical for regulatory compliance and product identification.
3. Daidaituwa: The structure must be compatible with pharmaceutical packaging machines and meet regulatory requirements (misali. FDA, EMA).
4. Ayyukan rufewa: The heat-seal coating must ensure a strong seal with the blister packaging substrate (misali. PVC, PVDC-coated PVC or Aclar® laminate).

Typical cold foil thickness range:

– PET film: 12-25 microns
– Layer m: 1- 3 microns
– Aluminum foil: 6–9 microns
– Heat seal coating: 1–5 microns

This structure achieves a balance between barrier protection, printability and sealing efficiency. Cold-formed aluminum is very suitable for pharmaceutical packaging materials due to its orderly structure, excellent ductility, excellent barrier properties, kyau sealing Properties da yawa sauran abũbuwan amfãni.