Aluminum foil blister packaging is a kind of outer packaging product, used for the packaging of many types of pre-formed products, one of the most common aspects is medicinal aluminum foil packaging. It is composed of PET or PVC plastic. Aluminum foil blister packaging has many excellent characteristics, which can protect the product from many external factors, including humidity, oksigen, mikroorganisma, and even ultraviolet rays. Lebih-lebih lagi, this type of packaging reduces the addition of additional cartons, so the total cost of packaging will be relatively reduced.

With the advancement of technical means, there have been many innovative changes in aluminum foil medicinal packaging. Sebagai contoh, many manufacturers will add some label information on the outer packaging to facilitate the use of users. Because of the particularity of drugs, regulatory agencies require legislation that the code and label information contained in packaged products must match. This still presents certain difficulties for manufacturers in the code and labeling of blister packs.

Pertama sekali, the information code attached to the medicinal aluminum foil blister pack must be readable by the machine. For blister packaging, the commonly used aluminum foil must comply with industry standards and be able to print with high resolution. If the information is not clear, it will not pass the quality control inspection, which will increase the cost of production.

The second type of packaging material is also a problem for medicinal foil packaging. Although blister packaging is suitable for various applications, some of these applications may require specific materials, such as composite thin layers. Pada masa yang sama, according to different materials, manufacturers of pharmaceutical packaging need to choose inks that are suitable for fast adhesion.

The third aspect is the production line speed of aluminum foil packaging materials. In the pharmaceutical packaging industry, sometimes the quantity required to be produced is huge. If there is no reliable solution, the manufacturer may experience production accuracy, efficiency, and quality control. Some problems, sometimes because different materials need to switch to different production processes, it is possible that the production speed will be greatly reduced.