+86-371-66302886 | [email protected]

What are the properties of aluminum foil for packaging?

گهر

What are the properties of aluminum foil for packaging?

1 Aluminum foil has silvery white luster, thin and light performance

Aluminum foil has a shining silver-white beautiful luster, non-toxic, بي ذائقو, and harmless to the human body. After coloring, embossing and printing, it can get any colorful patterns and patterns without losing its beautiful luster. في الحال, the minimum thickness of rolled foil can reach 4pm, and the aluminum box is light, such as aluminum foil with a thickness of 6um, which weighs only 16g per square meter.

2 Moisture-proof performance of aluminum foil

Compared with other packaging materials, aluminum foil has low moisture permeability, good moisture-proof performance, and has the advantages of safety, convenience and long shelf life, although pinholes and As the thickness of aluminum foil decreases, its moisture-proof performance still has advantages over plastic films without pinholes and other packaging materials, because the polymer chains of plastic have a large distance from each other and cannot prevent water vapor from penetrating. If the surface of the aluminum foil is coated with resin or compounded with paper or plastic film, its moisture-proof performance is better. See Table 2-1 for the moisture permeability of aluminum boxes and plastic films with different thicknesses.

Table 2-1 Moisture permeability of aluminum foil and plastic film

Packaging Material Type Moisture permeability/g (m²·24h) Material Type Moisture permeability/g (m²·24h)
0.009mm aluminum foil 1.08-10.70 0. 09mm PVC film 7
0.013mm aluminum foil 0.6-4.80 0. 1mm PVC film 4.8
0.018mm aluminum foil 0-1.24 0. 02mm PVC film 157
0.025mm aluminum foil 0-0.46 0. 065mm PVC film 28.4
0.03-0.15 mm aluminum foil 0 0. 095mm PVC film 41.2
cellophane 1670 0.008-0.009polyester film 26
moistureproof or 50-70 vinyl coated paper 60-95
tar paper 20-50 / /

The thickness of aluminum foil is so small that pinholes inevitably appear to a certain extent, and the minimum thickness of pinholes is generally considered to be 0.038mm. 025ايم ايم。 Due to the improvement of rolling technology and material, this thickness has been reduced to 0. 025ايم ايم. It has also been proved by experiments that the diameter of the vent hole is critical. When the diameter is less than 5um, no oxygen and water vapor can be transmitted in the measurable range.

 

پويون صفحو:
اڳيون صفحو:

رابطو

نمبر 52, ڊونگنگ روڊ, زينگ زو, هينان, چين

+86-371-66302886

[email protected]

وڌيڪ پڙهو

هڪ جواب ڏيو

توهان جو اي ميل پتو شايع نه ڪيو ويندو.

گرم وڪرو

لاڳاپيل مصنوعات

PVC/LDPE
Suppository Pack لاءِ PVC/LDPE Laminated رول
عهدو
8079 دوا پيڪنگ المونيم ورق
المونيم ورق دواسازي پيڪنگ specifications
عهدو
ٿڌو ٺهيل آلو اليو ورق
Alu Alu ٿڌي فارمنگ ايلومينيم ورق OPA/AL/PVC
عهدو
دوا پي وي سي شيٽ سخت چادر
دواسازي پي وي سي شيٽ پيڪنگنگ
عهدو

نيوز ليٽر

هڪ جواب ڏيو

توهان جو اي ميل پتو شايع نه ڪيو ويندو.

© ڪاپي رائيٽ © 2023 Huawei Phrma ورق پيڪنگنگ