+86-371-66302886 | [email protected]

What are the properties of aluminum foil for packaging?

Uy

What are the properties of aluminum foil for packaging?

1 Aluminum foil has silvery white luster, thin and light performance

Aluminum foil has a shining silver-white beautiful luster, non-toxic, tasteless, and harmless to the human body. After coloring, embossing and printing, it can get any colorful patterns and patterns without losing its beautiful luster. Ayni paytda, the minimum thickness of rolled foil can reach 4pm, and the aluminum box is light, such as aluminum foil with a thickness of 6um, which weighs only 16g per square meter.

2 Moisture-proof performance of aluminum foil

Compared with other packaging materials, aluminum foil has low moisture permeability, good moisture-proof performance, and has the advantages of safety, convenience and long shelf life, although pinholes and As the thickness of aluminum foil decreases, its moisture-proof performance still has advantages over plastic films without pinholes and other packaging materials, because the polymer chains of plastic have a large distance from each other and cannot prevent water vapor from penetrating. If the surface of the aluminum foil is coated with resin or compounded with paper or plastic film, its moisture-proof performance is better. See Table 2-1 for the moisture permeability of aluminum boxes and plastic films with different thicknesses.

Table 2-1 Moisture permeability of aluminum foil and plastic film

Packaging Material Type Moisture permeability/g (m²·24h) Material Type Moisture permeability/g (m²·24h)
0.009mm aluminum foil 1.08-10.70 0. 09mm PVC film 7
0.013mm aluminum foil 0.6-4.80 0. 1mm PVC film 4.8
0.018mm aluminum foil 0-1.24 0. 02mm PVC film 157
0.025mm aluminum foil 0-0.46 0. 065mm PVC film 28.4
0.03-0.15 mm aluminum foil 0 0. 095mm PVC film 41.2
cellophane 1670 0.008-0.009polyester film 26
moistureproof or 50-70 vinyl coated paper 60-95
tar paper 20-50 / /

The thickness of aluminum foil is so small that pinholes inevitably appear to a certain extent, and the minimum thickness of pinholes is generally considered to be 0.038mm. 025mmDue to the improvement of rolling technology and material, this thickness has been reduced to 0. 025mm. It has also been proved by experiments that the diameter of the vent hole is critical. When the diameter is less than 5um, no oxygen and water vapor can be transmitted in the measurable range.

 

Oldingi sahifa:
Keyingi sahifa:

Aloqa

№ 52, Dongming yo'li, Chjenchjou, Xenan, Xitoy

+86-371-66302886

[email protected]

Ko'proq o'qish

Javob qoldiring

Sizning elektron pochta manzilingiz nashr etilmaydi.

Issiq sotish

Tegishli mahsulotlar

Alyuminiy tropik blister folga
Tropik blister folga
Belgilash
Oson yirtib tashlangan alyuminiy tasmali folga
AL/PE alyuminiy folga tasmasi/ oson yirtib tashlangan alyuminiy tasma folga
Belgilash
blister folga to'plami
Alyuminiy blisterli folga
Belgilash
pharma alyuminiy folga
Farmatsevtika alyuminiy folga qadoqlash
Belgilash

Axborot byulleteni

Javob qoldiring

Sizning elektron pochta manzilingiz nashr etilmaydi.

© Mualliflik huquqi © 2023 Huawei Phrma folga qadoqlash